Gadgets! Gadgets! Gadgets! All About How Gadgets Can Make Life Better and More Enjoyable

Bnc Male

Bnc Male

Bnc Connector

Use

The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. BNC connectors were commonly used on 10base2 thin Ethernet networks, both on cable interconnections and network cards, though these have largely been replaced by newer Ethernet devices whose wiring does not use coaxial cable. Some ARCNET networks use BNC-terminated coax.

Specifications

BNC connectors exist in 50 and 75 ohm versions. Originally all were 50 ohm and were used with cables of other impedances, the small mismatch being negligible at lower frequencies. The 75 ohm types can sometimes be recognized by the reduced or absent dielectric in the mating ends. The different versions are designed to mate with each other, although the impedance mismatch in the cable may lead to signal reflections. Typically, they are specified for use at frequencies up to 4 and 2 GHz, respectively.

75 ohm BNC Connectors are primarily used for video and DS3 Telco central office applications whereas 50 ohm are used for data and RF. There was a convention in the BBC that BNC connectors used for video were always 50 ohm probably because a stray 50 ohm BNC plug would damage a 75 ohm socket if connected in error. Many VHF receivers used 75 ohm antenna inputs, so they often used 75 ohm BNC connectors.

History

The connector was named after its bayonet mount locking mechanism and its two inventors, Paul Neill of Bell Labs (inventor of the N connector) and Amphenol engineer Carl Concelman (inventor of the C connector). Other backronyms the BNC has picked up over the years include: aby Neill-Concelman, aby N connector, ritish Naval Connector, ayonet Nut Connector, ayonet Naval Connector. The basis for the development of the BNC connector was largely the work of Octavio M. Salati, a graduate of the Moore School of Electrical Engineering of the University of Pennsylvania (BSEE '36, PhD '63). He filed a patent in 1945 (granted 1951) while working at Hazeltine Electronics Corporation for a connector placed on coaxial cables that would minimize wave reflection/loss.

Similar connectors

The BNC connector is much smaller than the earlier N or the C connectors.

A threaded version of the BNC connector, known as the TNC connector (for Threaded Neill-Concelman) is also available. It has superior performance to the BNC connector at microwave frequencies.

Triaxial BNC connector

BNC connectors are commonly used in NIM electronics, but they are now often replaced by LEMO 00 miniature connectors which allow for higher densities. For higher voltages, MHV and SHV connectors are typically used. MHV connectors are easily mistaken for BNC connectors and can be made to mate with them by brute force. The SHV connector was developed as a safer alternative to MHV connectors and will not intermate with ordinary BNC connectors.

In the USSR, BNC connectors were copied as SR-50 (Russian: -50) and SR-75 (Russian: -75) connectors. These connectors have slightly different dimensions (as a result of recalculating from Imperial to Metric system), but are generally interchangeable with BNC, sometimes with force applied.

Twin BNC (also known as twinax) connectors use the same bayonet latching shell as an ordinary BNC connector but contain two independent contact points (one male and one female), allowing the connection of a 78 ohm or 95 ohm shielded differential pair such as RG-108A. They are capable of operation at 100 MHz and 100 volts. Twin BNC connectors will not intermate with ordinary BNC connectors.

Triaxial (also known as triax) connectors are a variant on BNC which carry both a signal and guard as well as ground conductor. These are used in sensitive electronic measurement systems, particularly of Keithley manufacture.[citation needed] Early ones were designed with just an extra inner conductor, but later tri-axial connectors also include a three-lug arrangement to rule out an accidental forced mating with a BNC connector. Adaptors exist to allow some interconnection possibilities between tri-ax and BNC connectors.

Female BNC connector

Cables with BNC connectors

Adapter between a female BNC connector and banana plugs

Pulse generators with BNC connectors and cables

Male 75 ohm BNC connector

See also

BNC inserter/remover tool

References

Wikimedia Commons has media related to: BNC connectors

Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (May 2008)

^ Amphenol Connex - BNC Connector specifications

^ Electrical connector. US Patent 2,540,012 by Octavio M. Salati

^ Amphenol RF - Twin BNC connector series

v  d  e

RF connectors (coaxial)

APC-7  BNC  C  F  FME  Hirose U.FL  IPX  Motorola  MCX  MMCX  N  QLS  QMA/QN  RCA  SMA  SMB  SMC  Twin-lead  TNC  TV aerial plug  UHF / Mini-UHF

Variations and alternate names: 2.9 mm (SMA)  7 mm  Triax / Triaxial  Twin BNC / Twinax (BNC)  IPEX   MHF   AMC (UFL)  SnapN  RP-TNC  RP-SMA

Old or seldom used: EIA  GR  LEMO 00  Musa

See also: Radio frequency  Radio spectrum  Audio and video connectors  Audio and video interfaces and connectors

v  d  e

Audio and video connectors

Single conductor audio

Binding post  Banana plug  Fahnestock clip

Analog audio

TRS  XLR  DIN / Mini-DIN  D-sub  Speakon

Digital audio

BNC  S/PDIF  TosLink  XLR  D-sub

Video

DVI / Mini-DVI / Micro-DVI  DMS-59 / LFH  VGA / Mini-VGA  DFP  BNC  DIN / Mini-DIN  DB13W3  D-Terminal

Audio and Video

RCA  ADC  Belling-Lee  DisplayPort / Mini DisplayPort  EVC  F  HDMI  P&D  SCART  TRS

Visual charts

List of video connectors

v  d  e

Audio and Video Interfaces and Connectors

Audio Only

Analog

Interface: PC System Design Guide Connectors: TRS 3.5mm

Digital

Interface: S/PDIF Connectors: RCA Jack (Coaxial), TOSLINK (Optical), BNC

Video Only

Analog

Interface: VGA Connectors: DB-15   Interface: Composite Connectors: RCA jack yellow   Interface: S-Video Connectors: Mini-DIN 4 Pin   Interface: Component Connectors: RCA Jacks 3   Interface: Composite, S-Video, and Component Connectors: VIVO using Mini-DIN 9 Pin

Digital and

Analog

Interface: DVI Connectors: DVI

Video and Audio

Digital

Interface: HDMI Connectors: HDMI connector   Interface: DisplayPort Connectors: DisplayPort connector

Categories: Coaxial connectorsHidden categories: All articles with unsourced statements | Articles with unsourced statements from February 2009 | Articles needing additional references from May 2008 | All articles needing additional references
About the Author

I am a professional writer from Cheap On Sales, which contains a great deal of information about ying yang jewelry , beaded ornament kits, welcome to visit!

Radio Male-bnc connecter pin broke off inside of the female bnc-connector, How do I go about getting it out?

My Male-bnc connecter pin broke off inside of the female bnc-connector,of my Portible UHF radio. How do I go about getting it out?

Try using a mechanics magnet, they are really strong

BNC Male to RCA Male Socket Connector Adapter for CCTV Video Camera JR-BNCRCA2 from Dinodirect.com